FB Series, M Type Auto Datasheet by Taiyo Yuden

View All Related Products | Download PDF Datasheet
m High Quality Equipment TAIYD YUDEN 2019
Notice for TAIYO YUDEN Products [ For High Quality and/or Reliability Equipment
(Automotive Electronic Equipment / Industrial Equipment)
]
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2018. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■ Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■ Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■ The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment), medical
equipment classified as Class I or II by IMDRF, industrial equipment, and automotive interior applications, etc.
Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which
may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
medical equipment classified as Class III by IMDRF).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■ Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■ Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■ The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter “TAIYO YUDEN’s official sales channel”). Please note that the contents of this
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’s official sales
channel.
■ Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to “U.S. Export
Administration Regulations”, “Foreign Exchange and Foreign Trade Control Law” of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
19
fur High Quality Equipment Automotive Application Guide TAIYD YUDEN 2019
▶Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
Automotive Application Guide
We classify automotive electronic equipment into the following four application categories and set usable
application categories for each of our products. When using our products for automotive electronic
equipment, please be sure to check such application categories and use our products accordingly. Should
you have any questions on this matter, please contact us.
Category Automotive Electronic Equipment (Typical Example)
POWERTRAIN
・Engine ECU (Electronically Controlled Fuel Injector)
・Cruise Control Unit
・4WS (4 Wheel Steering)
・Automatic Transmission
・Power Steering
・HEV/PHV/EV Core Control (Battery, Inverter, DC-DC)
・Automotive Locator (Car location information providing device), etc.
SAFETY
・ABS (Anti-Lock Brake System)
・ESC (Electronic Stability Control)
・Airbag
・ADAS (Equipment that directly controls running, turning and stopping), etc.
BODY & CHASSIS
・Wiper
・Automatic Door
・Power Window
・Keyless Entry System
・Electric Door Mirror
・Interior Lighting
・LED Headlight
・TPMS (Tire Pressure Monitoring System)
・Anti-Theft Device (Immobilizer), etc.
INFOTAINMENT
・Car Infotainment System
・ITS/Telematics System
・Instrument Cluster
・
ADAS (Sensor, Equipment that is not interlocked with safety equipment or powertrain), etc.
Automotive Application Guide
15
19
CHIP BEAD |NDU¢TOR r, $' |:||:||:I|:I|:I|:I|:I|:I|:I|:I TAIYC) YUDEN 2015
hq_chipbeads_e-E07R01
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
AEC-Q200 Grade 3 (we conduct the evaluation at the test condition of Grade 3.)
*Operating environment Temp:-40～85℃
REFLOW
AEC-Q200
■PART NUMBER *Operating Temp. : -40～125℃（Including self-generated heat）
F B △ M J 3 2 1 6 H S 8 0 0 － T V △＝Blank space
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨
①Series name
Code Series name
FB Ferrite bead
②Shape
Code Shape
M Rectangular chip
③Characteristics
Code Characteristics
J Standard
H High Impedance type
④Dimensions（L×W）
Code Type（inch） Dimensions
（L×W）［mm］
1608 1608（0603） 1.6×0.8
2125 2125（0805） 2.0×1.25
2012 2012（0805）
2016 2016（0806） 2.0×1.6
3216 3216（1206） 3.2×1.6
3225 3225（1210） 3.2×2.5
4516 4516（1806） 4.5×1.6
4525 4525（1810） 4.5×2.5
⑤Material
Code Material
HS Refer to impedance curves
for material differences
HM
HL
⑥Nominal impedance
Code
（example） Nominal impedance［Ω］
330 33
221 220
102 1000
⑦Impedance tolerance
Code Impedance tolerance
－ ±25％
N ±30％
⑧Packaging
Code Packaging
T Taping
⑨Internal code
Code Internal code
V Bead Inductor for Industrial and Automotive
W
■FEATURES
●HS：For broadband applications
●HM：For upper MHz range applications
●HL：For GHz range applications
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
W
L
e
T
Recommended Land Patterns
Surface Mounting
・Mounting and soldering conditions should be
checked beforehand.
AAB
C
Type A B C
FB MJ1608 1.0 1.0 1.0
FB MJ2125 1.4 1.2 1.65
FB MJ3216 1.4 2.2 2.0
FB MJ4516 1.75 3.5 2.0
FB MH1608 1.0 1.0 1.0
FB MH2012 1.4 1.2 1.65
FB MH2016 1.4 1.2 2.0
FB MH3216 1.4 2.2 2.0
FB MH3225 1.4 2.2 2.9
FB MH4516 1.75 3.5 2.0
FB MH4525 1.75 3.5 2.9
Unit：mm
Type L W T e Standard quantity [pcs]
Paper tape Embossed tape
FB MJ1608
（0603）
1.6±0.2
（0.063±0.008）
0.8±0.2
（0.031±0.008）
0.8±0.2
（0.031±0.008）
0.3±0.2
（0.012±0.008） 4000 －
FB MJ2125
（0805）
2.0±0.2
（0.079±0.008）
1.25±0.2
（0.049±0.008）
0.85±0.2
（0.033±0.008）
0.5±0.3
（0.020±0.012） 4000 －
FB MJ3216
（1206）
3.2±0.3
（0.126±0.012）
1.6±0.2
（0.063±0.008）
1.1±0.2
（0.043±0.008）
0.5±0.3
（0.020±0.012） － 2000
FB MJ4516
（1806）
4.5±0.3
（0.177±0.012）
1.6±0.2
（0.063±0.008）
1.1±0.2
（0.043±0.008）
0.5±0.3
（0.020±0.012） － 2000
FB MH1608
（0603）
1.6±0.1
（0.063±0.004）
0.8±0.1
（0.031±0.004）
0.8±0.1
（0.031±0.004）
0.3±0.15
（0.012±0.006） 4000 －
FB MH2012
（0805）
2.0±0.2
（0.079±0.008）
1.25±0.2
（0.049±0.008）
0.85±0.2
（0.033±0.008）
0.5±0.3
（0.020±0.012） 4000 －
FB MH2016
（0806）
2.0±0.2
（0.079±0.008）
1.6±0.2
（0.063±0.008）
1.6±0.2
（0.063±0.008）
0.5±0.3
（0.020±0.012） － 2000
FB MH3216
（1206）
3.2±0.3
（0.126±0.012）
1.6±0.2
（0.063±0.008）
1.6±0.2
（0.063±0.008）
0.5±0.3
（0.020±0.012） － 2000
FB MH3225
（1210）
3.2±0.3
（0.126±0.012）
2.5±0.3
（0.098±0.012）
2.5±0.3
（0.098±0.012）
0.5±0.3
（0.020±0.012） － 1000
FB MH4516
（1806）
4.5±0.3
（0.177±0.012）
1.6±0.2
（0.063±0.008）
1.6±0.2
（0.063±0.008）
0.5±0.3
（0.020±0.012） － 2000
FB MH4525
（1810）
4.5±0.4
（0.177±0.016）
2.5±0.3
（0.098±0.012）
2.5±0.3
（0.098±0.012）
0.9±0.6
（0.035±0.024） － 1000
Unit：mm（inch）
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
▶Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
REFLOW
85
19
AEC-Q200
m TAIYC) YUDEN 2019
■PART NUMBER
・ All the Chip Bead Inductors for Power Lines of the catalog lineup are RoHS compliant.
Note)
　・ The exchange of individual specifications is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
　・ *1: Automotive (AEC-Q200 Qualified) products for BODY & CHASSIS, and INFOTAINMENT. Please check ”Automotive Application Guide” for further details before using the products.
　　＜　　　　　　　　　：AEC-Q200 qualified＞
　　　　　All the Chip Bead Inductors for Power Lines of　*1 marks are tested based on the test conditions and methods defined in AEC-Q200 by family item.
　　　　　Please consult with TAIYO YUDEN’s official sales channel for the details of the product specification and AEC-Q200 test results, etc.,
　　　　　and please review and　approve TAIYO YUDEN's product specification before ordering.
・ *2: Industrial　products and Medical products
Standard type
●FB MJ1608
FB MJ1608HS280NTV 0.007 4.0 0.8 ±0.2 *1, *2
FB MJ1608HM230NTV 0.007 4.0 0.8 ±0.2 *1, *2
●FB MJ2125
FB MJ2125HS250NTV 0.004 6.0 0.85 ±0.2 *1, *2
FB MJ2125HS420-TV 0.008 4.0 0.85 ±0.2 *1, *2
FB MJ2125HM210NTV 0.004 6.0 0.85 ±0.2 *1, *2
FB MJ2125HM330-TV 0.008 4.0 0.85 ±0.2 *1, *2
FB MJ2125HL8R0NTV 0.008 4.0 0.85 ±0.2 *1, *2
●FB MJ3216
FB MJ3216HS480NTV 0.005 6.0 1.1 ±0.2 *1, *2
FB MJ3216HS800-TV 0.010 4.0 1.1 ±0.2 *1, *2
FB MJ3216HM380NTV 0.005 6.0 1.1 ±0.2 *1, *2
FB MJ3216HM600-TV 0.010 4.0 1.1 ±0.2 *1, *2
FB MJ3216HL160NTV 0.012 4.0 1.1 ±0.2 *1, *2
●FB MJ4516
FB MJ4516HS720NTV 0.007 6.0 1.1 ±0.2 *1, *2
FB MJ4516HS111-TV 0.014 4.0 1.1 ±0.2 *1, *2
FB MJ4516HM560NTV 0.007 6.0 1.1 ±0.2 *1, *2
FB MJ4516HM900-TV 0.014 4.0 1.1 ±0.2 *1, *2
FB MJ4516HL230NTV 0.014 3.5 1.1 ±0.2 *1, *2
High impedance type（ＧＨz Band）
●FB MH1608
tolerance tolerance
FB MH1608HM470-TV ±25％ ±40％ 0.020 3.5 0.8 ±0.1 *1, *2
FB MH1608HM600-TV ±25％ ±40％ 0.025 3.0 0.8 ±0.1 *1, *2
FB MH1608HM101-TV ±25％ ±40％ 0.035 2.5 0.8 ±0.1 *1, *2
FB MH1608HM151-TV ±25％ ±40％ 0.050 2.1 0.8 ±0.1 *1, *2
FB MH1608HM221-TV ±25％ ±40％ 0.070 1.8 0.8 ±0.1 *1, *2
FB MH1608HM331-TV ±25％ ±40％ 0.130 1.2 0.8 ±0.1 *1, *2
FB MH1608HM471-TV ±25％ ±40％ 0.150 1.0 0.8 ±0.1 *1, *2
FB MH1608HM601-TV ±25％ ±40％ 0.170 0.9 0.8 ±0.1 *1, *2
FB MH1608HM102-TV ±25％ ±40％ 0.350 0.6 0.8 ±0.1 *1, *2
FB MH1608HL300-TV ±25％ ±40％ 0.028 2.6 0.8 ±0.1 *1, *2
FB MH1608HL600-TV ±25％ ±40％ 0.045 2.1 0.8 ±0.1 *1, *2
FB MH1608HL121-TV ±25％ ±40％ 0.130 1.2 0.8 ±0.1 *1, *2
FB MH1608HL221-TV ±25％ ±40％ 0.170 0.9 0.8 ±0.1 *1, *2
FB MH1608HL331-TV ±25％ ±40％ 0.210 0.8 0.8 ±0.1 *1, *2
FB MH1608HL471-TV ±25％ ±40％ 0.350 0.6 0.8 ±0.1 *1, *2
FB MH1608HL601-TV ±25％ ±40％ 0.450 0.5 0.8 ±0.1 *1, *2
※）The rated current is the value of current at which the temperature of the element is increased by 40 deg.
600 1800
220 950
330 1200
470 1500
30 120
60 220
120 540
470 750
600 900
1000 1200
150 270
220 370
330 520
47 75
60 100
100 170
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］ Note
（Ω） （Ω）
23 ±30％ 100
Part number
Nominal impedance
Measuring frequency 100［MHz］
Nominal impedance
Measuring frequency 1［GHz］
56 ±30％ 100
90 ±25％ 100
Thickness
［mm］ Note
72 ±30％ 100
110 ±25％ 100
Part number Nominal impedance
（Ω） Impedance tolerance Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
60 ±25％ 100
16 ±30％ 100
80 ±25％ 100
38 ±30％ 100
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］ Note
48 ±30％ 100
8 ±30％ 100
Part number Nominal impedance
（Ω） Impedance tolerance Measuring frequency
［MHz］
21 ±30％ 100
33 ±25％ 100
Thickness
［mm］ Note
25 ±30％ 100
42 ±25％ 100
Part number Nominal impedance
（Ω） Impedance tolerance Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］ Note
28 ±30％ 100
23 ±30％ 100
Part number Nominal impedance
（Ω） Impedance tolerance Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
AEC-Q200
hq_chipbeads_e-E07R01
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
▶Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
86
19
TAIYC) YUDEN 2019
■PART NUMBER
High impedance type
●FB MH2012
FB MH2012HM800-TV 0.025 2.7 0.85 ±0.2 *1, *2
FB MH2012HM121-TV 0.032 2.5 0.85 ±0.2 *1, *2
FB MH2012HM221-TV 0.060 2.0 0.85 ±0.2 *1, *2
FB MH2012HM331-TV 0.080 1.8 0.85 ±0.2 *1, *2
●FB MH2016
FB MH2016HM121NTV 0.015 4.5 1.6 ±0.2 *1, *2
FB MH2016HM251NTV 0.050 2.0 1.6 ±0.2 *1, *2
●FB MH3216
FB MH3216HM221NTV 0.020 4.0 1.6 ±0.2 *1, *2
FB MH3216HM501NTV 0.070 2.0 1.6 ±0.2 *1, *2
●FB MH3225
FB MH3225HM601NTV 0.042 3.0 2.5 ±0.3 *1, *2
FB MH3225HM102NTV 0.100 2.0 2.5 ±0.3 *1, *2
FB MH3225HM202NTV 0.130 1.2 2.5 ±0.3 *1, *2
●FB MH4516
FB MH4516HM851NTV 0.100 1.5 1.6 ±0.2 *1, *2
●FB MH4525
FB MH4525HM102NTV 0.060 3.0 2.5 ±0.3 *1, *2
FB MH4525HM162NTV 0.130 2.0 2.5 ±0.3 *1, *2
●High current type
FB MJ1608HS220NTW 0.004 7.5 0.8 ±0.2 *1, *2
FB MJ1608HS280NTW 0.006 6.0 0.8 ±0.2 *1, *2
FB MJ1608HM180NTW 0.004 7.5 0.8 ±0.2 *1, *2
FB MJ1608HM230NTW 0.006 6.0 0.8 ±0.2 *1, *2
※）The rated current is the value of current at which the temperature of the element is increased by 40 deg.
23 ±30％ 100
28 ±30％ 100
18 ±30％ 100
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］ Note
22 ±30％ 100
1600 ±30％ 100
Part number Nominal impedance
（Ω） Impedance tolerance Measuring frequency
［MHz］
Rated current
［A］（max.）
Thickness
［mm］ Note
1000 ±30％ 100
Thickness
［mm］ Note
850 ±30％ 100
Part number Nominal impedance
（Ω） Impedance tolerance Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Part number Nominal impedance
（Ω） Impedance tolerance Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
1000 ±30％ 100
2000 ±30％ 100
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］ Note
600 ±30％ 100
500 ±30％ 100
Part number Nominal impedance
（Ω） Impedance tolerance Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］ Note
220 ±30％ 100
250 ±30％ 100
Part number Nominal impedance
（Ω） Impedance tolerance Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］ Note
120 ±30％ 100
330 ±25％ 100
Part number Nominal impedance
（Ω） Impedance tolerance Measuring frequency
［MHz］
120 ±25％ 100
220 ±25％ 100
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］ Note
80 ±25％ 100
Part number Nominal impedance
（Ω） Impedance tolerance Measuring frequency
［MHz］
hq_chipbeads_e-E07R01
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
▶Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
87
19
4.1. High Quality Equipment TAIYD YUDEN 2019
■ELECTRICAL CHARACTERISTICS
Standard type
■FB MJ1608 ■FB MJ2125
■FB MJ3216
■FB MJ4516
0
5
10
15
20
25
30
35
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HS280NTV
Z
X
R
0
10
20
30
40
50
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HM230NTV
Z
X
R
0
5
10
15
20
25
30
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ2125HS250NTV
Z
X
R
0
10
20
30
40
50
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ2125HS420-TV
Z
X
R
0
10
20
30
40
50
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ2125HM210NTV
Z
X
R
0
10
20
30
40
50
60
70
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ2125HM330-TV
Z
X
R
0
10
20
30
40
50
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ2125HL8R0NTV
Z
X
R
0
10
20
30
40
50
60
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ3216HS480NTV
Z
X
R
0
20
40
60
80
100
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ3216HS800-TV
Z
X
R
0
10
20
30
40
50
60
70
80
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ3216HM380NTV
Z
X
R
0
20
40
60
80
100
120
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ3216HM600-TV
Z
X
R
0
20
40
60
80
100
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ3216HL160NTV
Z
X
R
0
20
40
60
80
100
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ4516HS720NTV
Z
X
R
0
20
40
60
80
100
120
140
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ4516HS111-TV
Z
X
R
0
20
40
60
80
100
120
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ4516HM560NTV
Z
X
R
hq_chipbeads_char_e-E07R01
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
▶Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
88
19
4.1. High Quality Equipment TAIYD YUDEN 2019
■ELECTRICAL CHARACTERISTICS
High impedance type(GHz Band）
■FB MH1608
0
20
40
60
80
100
120
140
160
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ4516HM900-TV
Z
X
R
0
20
40
60
80
100
120
140
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ4516HL230NTV
Z
X
R
0
10
20
30
40
50
60
70
80
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM470-TV
Z
X
R
0
20
40
60
80
100
120
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM600-TV
Z
X
R
0
50
100
150
200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM101-TV
Z
X
R
0
50
100
150
200
250
300
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM151-TV
Z
X
R
0
50
100
150
200
250
300
350
400
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM221-TV
Z
X
R
0
100
200
300
400
500
600
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM331-TV
Z
X
R
0
100
200
300
400
500
600
700
800
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM471-TV
Z
X
R
0
200
400
600
800
1000
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM601-TV
Z
X
R
0
200
400
600
800
1000
1200
1400
1600
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HM102-TV
Z
X
R
0
50
100
150
200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL300-TV
Z
X
R
0
50
100
150
200
250
300
350
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL600-TV
Z
X
R
0
100
200
300
400
500
600
700
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL121-TV
Z
X
R
hq_chipbeads_char_e-E07R01
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
▶Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
89
19
4.1. High Quality Equipment TAIYD YUDEN 2019
■ELECTRICAL CHARACTERISTICS
High impedance type
■FB MH2012
■FB MH2016
■FB MH3216 ■FB MH3225
0
200
400
600
800
1000
1200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL221-TV
Z
X
R
0
200
400
600
800
1000
1200
1400
1600
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL331-TV
Z
X
R
0
500
1000
1500
2000
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL471-TV
Z
X
R
0
500
1000
1500
2000
2500
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH1608HL601-TV
Z
X
R
0
20
40
60
80
100
120
140
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2012HM800-TV
Z
X
R
0
50
100
150
200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2012HM121-TV
Z
X
R
0
50
100
150
200
250
300
350
400
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2012HM221-TV
Z
X
R
0
100
200
300
400
500
600
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2012HM331-TV
Z
X
R
0
50
100
150
200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2016HM121NTV
Z
X
R
0
50
100
150
200
250
300
350
400
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH2016HM251NTV
Z
X
R
0
50
100
150
200
250
300
350
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH3216HM221NTV
Z
X
R
0
100
200
300
400
500
600
700
800
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH3216HM501NTV
Z
X
R
0
100
200
300
400
500
600
700
800
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH3225HM601NTV
Z
X
R
hq_chipbeads_char_e-E07R01
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
▶Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
90
19
4.1. High Quality Equipment FB series M Iype mmvmwmm TAIYC) YUDEN 2019
■ELECTRICAL CHARACTERISTICS
■FB MH4516
■FB MH4525 ■
High current type
■Derating of Rated Current
●FB series M type
　 Derating of current is necessary for FB series M type depending on ambient temperature.
　 Please refer to the chart shown below for appropriate derating of current.
0
200
400
600
800
1000
1200
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH3225HM102NTV
Z
X
R
0
500
1000
1500
2000
2500
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH3225HM202NTV
Z
X
R
0
200
400
600
800
1000
1200
1400
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH4516HM851NTV
Z
X
R
0
200
400
600
800
1000
1200
1400
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH4525HM102NTV
Z
X
R
0
500
1000
1500
2000
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MH4525HM162NTV
Z
X
R
0
5
10
15
20
25
30
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HS220NTW
Z
X
R
0
5
10
15
20
25
30
35
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HS280NTW
Z
X
R
0
5
10
15
20
25
30
35
40
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HM180NTW
Z
X
R
0
10
20
30
40
50
1 10 100 1000 10000
Impedance[Ω]
Frequency[MHz]
FB MJ1608HM230NTW
Z
X
R
0%
20%
40%
60%
80%
100%
120%
-40 -20 0 20 40 60 80 100 120 140
Ratio to Rated Current
Ambient Temperature(℃)
FB series M type
hq_chipbeads_char_e-E07R01
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
▶Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
■ Derating of Rated Current
●FB series M type
Derating of current is necessary for FB series M type depending on ambient temperature.
Please refer to the chart shown below for appropriate derating of current.
91
19
-40 -20 0 20 40 60 80 100 120 14
0
120
100
80
60
40
20
0
Ambient Temperature (℃)
Ratio to rated current
(%)
FB series M type
{OOOOO DEED) hi OOOOO >EUFU< taiyo="" yuden="">
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E05R01
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
■PACKAGING
①Minimum Quantity
Type Standard Quantity［pcs］
Paper Tape Embossed Tape
1608（0603） 4000 －
2125（0805） 4000 －
2012（0805） 4000 －
2016（0806） － 2000
3216（1206） － 2000
3225（1210） － 1000
4516（1806） － 2000
4525（1810） － 1000
4532（1812） － 2000
②Tape Material
●Card board carrier tape
Top tape
Base tape
Sprocket hole
Bottom tape Chip cavity
Chip
Chip Filled
●Embossed tape
Top tape
Base tape
Sprocket hole
Chip cavity
Chip
Chip Filled
③Taping Dimensions
●Paper tape (0.315 inches wide)
F
2.0±0.05
(0.079±0.002)
4.0±0.1
(0.157±0.004)
1.75±0.1
(0.069±0.004）
3.5±0.05
(0.138±0.002)
8.0±0.3
(0.315±0.012)
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
Sprocket hole
A
B
T
+— TAIYO YUDEN
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E05R01
Type Chip Cavity Insertion Pitch Tape Thickness
A B F T
FBMJ1608
FBMH1608
（0603）
1.0±0.2
（0.039±0.008）
1.8±0.2
（0.071±0.008）
4.0±0.2
（0.157±0.008）
1.1max
（0.043max）
FBMJ2125
FBMH2012
（0805）
1.5±0.2
（0.059±0.008）
2.3±0.2
（0.091±0.008）
4.0±0.2
（0.157±0.008）
1.1max
（0.043max）
Unit : mm（inch）
●Embossed tape (0.315 inches wide)
F
2.0±0.05
(0.079±0.002)
4.0±0.1
(0.157±0.004)
1.75±0.1
(0.069±0.004）
3.5±0.05
(0.138±0.002)
8.0±0.3
(0.315±0.012)
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
Sprocket hole
A
B
Type Chip Cavity Insertion Pitch Tape Thickness
A B F K T
FBMH2016
（0806）
1.8±0.2
（0.071±0.008）
2.2±0.2
（0.087±0.008）
4.0±0.2
（0.157±0.008）
2.6max
（0.102max）
0.6max
（0.024max）
FBMJ3216
（1206）
1.9±0.2
（0.075±0.008）
3.5±0.2
（0.138±0.008）
4.0±0.2
（0.157±0.008）
1.5max
（0.059max）
0.3max
（0.012max）
FBMH3216
（1206）
1.9±0.2
（0.075±0.008）
3.5±0.2
（0.138±0.008）
4.0±0.2
（0.157±0.008）
2.6max
（0.102max）
0.6max
（0.024max）
FBMH3225
（1210）
2.8±0.2
（0.110±0.008）
3.5±0.2
（0.138±0.008）
4.0±0.2
（0.157±0.008）
4.0max
（0.157max）
0.6max
（0.024max）
Unit : mm（inch）
●Embossed tape (0.472 inches wide)
F
2.0±0.05
(0.079±0.002)
4.0±0.1
(0.157±0.004)
1.75
±
0.1
(0.069±0.004）
5.5±0.05
(0.217±0.002)
12.0±0.3
(0.472±0.012)
φ1.
5
0.1/
0
(φ0.059＋0.004/-0)
Sprocket hole
A
B
T
K
Type Chip Cavity Insertion Pitch Tape Thickness
A B F K T
FBMJ4516
（1806）
1.9±0.2
（0.075±0.008）
4.9±0.2
（0.193±0.008）
4.0±0.2
（0.157±0.008）
1.5max
（0.059max）
0.3max
（0.012max）
FBMH4516
（1806）
1.9±0.2
（0.075±0.008）
4.9±0.2
（0.193±0.008）
4.0±0.2
（0.157±0.008）
2.6max
（0.102max）
0.6max
（0.024max）
FBMH4525
（1810）
2.9±0.2
（0.114±0.008）
4.9±0.2
（0.193±0.008）
4.0±0.2
（0.157±0.008）
4.0max
（0.157max）
0.6max
（0.024max）
FBMH4532
（1812）
3.6±0.2
（0.142±0.008）
4.9±0.2
（0.193±0.008）
8.0±0.2
（0.315±0.008）
4.0max
（0.157max）
0.6max
（0.024max）
Unit : mm（inch）
Blank tic-mans cm) saw-.y Bunk Do'hons I cadet VLI [>3 VI Lu IVV'J ?L U 2? 4:5 hula: a may: ‘ 2:: holes a! ‘nsmlun may 4mm. 0‘ mm D recuan a! tape iced \wscrliun leader m 400 mn ur 1u'c(includma 20 amply uawzms) Emmy cavmas m and of reel: 40 rnles m Nora TOD tape . . ,/ PuH emu," Base tape TAIYO YUDEN
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E05R01
④Leader and Blank portion
⑤Reel size
2.0±0.5
（0.079±0.020）
φ21.0±0.8
（φ0.827±0.031）
φ13.0±0.5
（φ0.512±0.020）
R1.0
φd
t
φD
W
Type φD φd W t
FBMJ1608
180＋0/－3
（7.09＋0/－0.118 ）
60＋1/－0
（2.36＋0.039/－0 ）
10.0±1.5
（0.394±0.059）
2.5max
(0.098max)
FBMJ2125
FBMJ3216
FBMJ4516 14.0±1.5
（0.551±0.059）
FBMH1608
10.0±1.5
（0.394±0.059）
FBMH2012
FBMH2016
FBMH3216
FBMH3225
FBMH4516 14.0±1.5
（0.551±0.059）
FBMH4525
FBMH4532 330±2.0
（12.99±0.080）
100±1.0
（3.94±0.039）
14.0±2.0
（0.551±0.080）
3.0max
(1.181max)
Unit : mm（inch）
⑥Top tape strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
TAIYO YUDEN
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_chipbeads_reli_e-E07R01
CHIP BEAD INDUCTORS FOR POWER LINE (FB SERIES M TYPE)
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value －40℃～＋125℃ （Including self-generated heat）
Test Methods and
Remarks Including self-generated heat
2. Storage Temperature Range
Specified Value －40℃～＋85℃
Test Methods and
Remarks *Note: －5 to ＋40℃ in taped packaging
3. Impedance
Specified Value Within the specified tolerance
Test Methods and
Remarks
Measuring equipment : Impedance analyzer (HP4291A) or its equivalent
Measuring frequency : 100±1 MHz
4. DC Resistance
Specified Value Within the specified range
Test Methods and
Remarks
Four-terminal method
Measuring equipment : Milliohm High-Tester 3226 (Hioki Denki) or its equivalent
5. Rated Current
Specified Value Within the specified range
6. Vibration
Specified Value Appearance : No significant abnormality
Impedance change : Within ±30% of the initial value
Test Methods and
Remarks
According to JIS C 0040.
Vibration type : A
Time : 2 hrs each in X,Y, and Z directions Total: 6 hrs
Frequency range : 10 to 55 to 10Hz (/min.)
Amplitude : 1.5 mm (shall not exceed acceleration 196m/s2)
Mounting method : Soldering onto PC board
7. Solderability
Specified Value 90% or more of immersed surface of terminal electrode shall be covered with fresh solder.
Test Methods and
Remarks
Solder temperature : 230±5℃
Immersion time : 4±1 sec.
Preconditioning : Immersion into flux.
Immersion and Removal speed : 25mm/sec.
8. Resistance to Soldering Heat
Specified Value Appearance : No significant abnormality
Impedance change : Within ±30% of the initial value
Test Methods and
Remarks
Preheating : 150℃ for 3 min.
Resistance to Soldering Heat : 260±5℃
Duration : 10±0.5 sec.
Preconditioning : Immersion into flux.
Immersion and Removal speed : 25mm/sec.
Recovery : 2 to 3 hrs of recovery under the standard condition after the test.
20 ‘1 lo R7230 J, ‘ 45:2 ‘ 45:2 ‘ ‘—’\*—’ (Umr mm) TAIYO YUDEN
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_chipbeads_reli_e-E07R01
9. Thermal Shock
Specified Value Appearance : No significant abnormality
Impedance change : Within＋50/－10% of the initial value
Test Methods and
Remarks
According to JIS C 0025.
Conditions for 1 cycle
Step Temperature (℃) Duration (min.)
1 －40±3℃ 30±3
2 Room Temperature Within 3
3 85±2℃ 30±3
4 Room Temperature Within 3
Number of cycles : 100
Mounting method : Soldering onto PC board
Recovery : 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
10. Resistance to Humidity (steady state)
Specified Value Appearances : No significant abnormality
Impedance change : Within ±30% of the initial value
Test Methods and
Remarks
Temperature : 40±2℃
Humidity : 90 to 95% RH
Duration : 500＋24/－0
Mounting method : Soldering onto PC board
Recovery : 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
11. Loading under Damp Heat
Specified Value Appearance No ignificant abnormality
Impedance change Within ±30% of the initial value
Test Methods and
Remarks
Temperature : 40±2℃
Humidity : 90 to 95%RH
Applied current : Rated current
Duration : 500＋24/－0 hrs
Mounting method : Soldering onto PC board
Recovery : 2 to 3hrs of recovery under the standard condition after the removal from test chamber.
12. High Temperature Loading Test
Specified Value Appearance : No significant abnormality
Impedance change : Within ±30% of the initial value
Test Methods and
Remarks
Temperature : 85±2℃
Duration : 500＋24/－0 hrs
Applied current : Rated current
Mounting method : Soldering onto PC board
Recovery : 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
13. Bending Strength
Specified Value Appearance : No mechanical damage.
Test Methods and
Remarks
Warp : 2mm
Testing board : Glass epoxy-resin substrate
Thickness : 0.8mm
Hooked 'ig @ 5' Board +Chip - Chip Cross-sectiun TAIYO YUDEN
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_chipbeads_reli_e-E07R01
14. Adhesion of Electrode
Specified Value No separation or indication of separation of electrode.
Test Methods and
Remarks
Applied force : 5N
Duration : 10 sec.
Note on standard condition: "standard condition" referred to herein is defined as follows:
5 to 35℃ of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity and 86 to 106kPa of air
pressure. Unless otherwise specified, all the tests are conducted under the "standard condition."
levvpevame c smae- .a Dmanm rsec‘, TAIYD YUDEN
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_chipbeads_prec_e-E07R01
CHIP BEAD INDUCTORS FOR POWER LINE （FB SERIES M TYPE）
■PRECAUTIONS
1. Circuit Design
Precautions
◆Operating environment
1. The products listed in this catalogue are intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric
appliances, office equipment, information and communication equipment), general medical equipment, industrial equipment, and automotive
interior applications, etc.
Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which may directly cause
loss of human life or bodily injury (e.g., specially controlled medical equipment, transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment,
aviation equipment, nuclear control equipment, undersea equipment, military equipment, etc.).
◆Rated current
1. Rated current of this product is shown in this catalogue, but please be sure to have the base board designed with adequate inspection in
case of the generation of heat becomes high within the rated current range when the base board is in high resistance or in bad heating
conditions.
2. PCB Design
Precautions ◆Land pattern design
1. Please refer to a recommended land pattern.
3. Considerations for automatic placement
Precautions
◆Adjustment of mounting machine
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
considerations
◆Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
Precautions
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering
heat, etc. sufficiently.
◆Preheating when soldering
Heating : The temperature difference between soldering and remaining heat should not be greater than 150℃.
Cooling : The temperature difference between the components and cleaning process should not be greater than 100℃.
◆Recommended conditions for using a soldering iron
Put the soldering iron on the land-pattern.
Soldering iron's temperature - Below 350℃
Duration - 3 seconds or less
The soldering iron should not directly touch the inductor.
Technical
considerations
◆Wave, Reflow, Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
【Recommended reflow condition】
◆Preheating when soldering
1. There is a case that products get damaged by a heat shock.
◆Recommended conditions for using a soldering iron
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
TAIYO YUDEN
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_chipbeads_prec_e-E07R01
5. Handling
Precautions
◆Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆Setting PC boards
1. When setting a chip mounted base board, please make sure that there is no residual stress to the chip by distortion in the board or at
screw part.
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the
board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
Technical
considerations
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Setting PC boards
1. There is a case that a characteristic varies with residual stress.
◆Breakaway PC boards (splitting along perforations)
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
6. Storage conditions
Precautions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
・Recommended conditions
Ambient temperature -5～40℃
Humidity Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may
decrease as time passes.
For this reason, inductors should be used within 6 months from the time of delivery.
Technical
considerations
◆Storage
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.

Products related to this Datasheet

FERRITE BEAD 1 KOHM 0603 1LN
FERRITE BEAD 220 OHM 1206 1LN
FERRITE BEAD 600 OHM 1210 1LN
FERRITE BEAD 80 OHM 1206 1LN
FERRITE BEAD 220 OHM 0603 1LN
FERRITE BEAD 48 OHM 1206 1LN
FERRITE BEAD 21 OHM 0805 1LN
FERRITE BEAD 220 OHM 0603 1LN
FERRITE BEAD 120 OHM 0603 1LN
FERRITE BEAD 220 OHM 0603 1LN
FERRITE BEAD 470 OHM 0603 1LN
FERRITE BEAD 60 OHM 0603 1LN
FERRITE BEAD 100 OHM 0603 1LN
FERRITE BEAD 600 OHM 0603 1LN
FERRITE BEAD 120 OHM 0805 1LN
FERRITE BEAD 80 OHM 0805 1LN
FERRITE BEAD 120 OHM 0603 1LN
FERRITE BEAD 600 OHM 0603 1LN
FERRITE BEAD 330 OHM 0603 1LN
FERRITE BEAD 600 OHM 0603 1LN
FERRITE BEAD 22 OHM 0603 1LN
FERRITE BEAD 220 OHM 0805 1LN
FERRITE BEAD 330 OHM 0805 1LN
FERRITE BEAD 8 OHM 0805 1LN
FERRITE BEAD 470 OHM 0603 1LN
FERRITE BEAD 80 OHM 0805 1LN
FERRITE BEAD 110 OHM 1806 1LN
FERRITE BEAD 60 OHM 0603 1LN
FERRITE BEAD 28 OHM 0603 1LN
FERRITE BEAD 42 OHM 0805 1LN