ADP5090-1-EVALZ(#2): 3.5V @ 800mA, 0.8 ~ 3.3V in

Summary

The ADP5090 is an ultralow, power synchronous, dc-to-dc boost regulator in a compact 3 mm × 3 mm LFCSP_WQ package. The ADP5090 runs from input voltages of 0.38 V to 3.3 V and requires minimal external components to provide a high efficiency solution with an integrated power switch, a synchronous rectifier, and battery management.

The EVAL-ADP5090 evaluation board provides an easy way to evaluate the device. This user guide describes how to quickly set up the board and deliver up to 3.5 V maximum voltage to the SYS output using an external resistor divide. The internal switches turn on if the storage element voltage at the BAT pin is above the externally programmed SETSD voltage of 2.4 V. The PGOOD indicator toggles high when the SYS pin ramps up to 3 V.

Complete information about the ADP5090 is available in the corresponding data sheet. Consult the data sheet in conjunction with this user guide when using the evaluation board.

Specifications

Manufacturer	Analog Devices Inc.
Category	Energy Harvesting
Sub-Category	Solar to DC Regulators
Eval Board Part Number	ADP5090-1-EVALZ-ND
Eval Board Supplier	Analog Devices Inc.
Eval Board	Normally In Stock
Application / Target Market	Energy Harvesting RF: Wireless Sensor
Voltage Out	3.5 V
Voltage In	80 mV ~ 3.3 V
Topology	Step Up
Voltage Out Range	- Fixed
Efficiency @ Conditions	>90%, 2V in, 3.5V @ 0.25 ~ 40 mA (SYS = 5 V) >90%, 2V in, 3.5V @ 0.026 ~ 35 mA (SYS = 3 V) >60%, 0.2V in, 3.5V @ 0.06 ~ 10 mA (SYS = 3 V) >60%, 0.2V in, 3.5V @ 0.033 ~ 4 mA (SYS = 2 V) >50%, 0.2V in, 3.5V @ 0.28 ~ 10 mA (SYS = 5 V)
Current Out	800 mA
Current In
Features	Current Limit (Adj. or Fixed) Open Circuit Protection Over Charge Protection Over Discharge Protection Power Good Output Shutdown, Enable, Standby
Design Author	Analog Devices
Component Count + Extras	17 + 18
Main I.C. Base Part	ADP5090
Date Created By Author	2014-09
Date Added To Library	2016-04