Pi 3 + Fona Tutorial

Access Initial State services through a Raspberry Pi 3 and Fona Cellular GSM and GPS breakout board

Image of Initial State's Pi 3 + Fona Tutorial This step-by-step tutorial by Initial State instructs on how to set up a serial connection between the Fona and the Pi 3, teaches how to use the Fona's cellular connection to give the Pi internet access, shows how to access the Fona's built-in GPS, and instructs how to setup the Pi 3 to collect GPS info and then stream it over a cellular connection.

Step-By-Step Tutorial

Requirements for the final project:
  • Raspberry Pi 3
  • SD card loaded with Raspbian Jessie
  • Adafruit FONA 808 - Mini Cellular GSM + GPS Breakout
  • Passive GPS antenna
  • GSM antenna
  • Lipoly battery
  • SIM card (2 G)
  • Portable battery charger
  • Female-female tie lines
  • Micro USB to USB cable
Requirements for transferring code and debugging:
  • Bluetooth keyboard/mouse
  • Screen or display
  • Wi-Fi dongle
  • USB hub

Initial State Software

תמונהמק"ט יצרןתיאוריישומיםרשיון - פרטי המשתמשמערכת ההפעלהכמות זמינהמחירהצגת הפרטים
STD 1 YEAR SERVICE SUBSCRIPTION21-10008STD 1 YEAR SERVICE SUBSCRIPTION-מספר חיבורים בלתי מוגבל-מיידית - 0$215.33הצגת הפרטים

Pi 3 Fona Tutorial

תמונהמק"ט יצרןתיאורכמות זמינהמחירהצגת הפרטים
16GB SD CARD NOOBS SOFTWARERASPBERRY PI NOOBS 16GB16GB SD CARD NOOBS SOFTWAREמיידית - 0See Page for Pricingהצגת הפרטים
BREAKOUT BOARD GSM/GPS FONA 8082542BREAKOUT BOARD GSM/GPS FONA 808מיידית - 0See Page for Pricingהצגת הפרטים
JUMPER WIRE F/F 40-ZIPPABLE 1PC266JUMPER WIRE F/F 40-ZIPPABLE 1PCמיידית - 162$14.18הצגת הפרטים
CBL USB2.0 A PLG-MCR B PLG 0.98'AK67421-0.3-VMCBL USB2.0 A PLG-MCR B PLG 0.98'מיידית - 18394$20.31הצגת הפרטים
2017-05-18 תאריך הפרסום