VideoLibrary

DC to DC Converters and Power Brick Heat Sinks

John O'Day of Advanced Thermal Solutions sits down with Peter Resca to discuss power brick DC-DC power converters which are an essential part of PCB design and their performance requires a stable temperature for optimum performance.

7/7/2016 9:13:03 PM

DC to DC Converters and Power Brick Heat Sinks

תמונהמק"ט יצרןתיאורכמות זמינהמחירהצגת הפרטים
1/8 BRICK HEATSINK 58X23X6.1MMATS-1178-C1-R01/8 BRICK HEATSINK 58X23X6.1MMמיידית - 127$41.79הצגת הפרטים
FULL BRICK HEATSINK 61X118X20MMATS-1151-C1-R0FULL BRICK HEATSINK 61X118X20MMמיידית - 2240$92.80הצגת הפרטים
1/8 BRICK HEATSINK 58X23X22.9MMATS-1181-C1-R01/8 BRICK HEATSINK 58X23X22.9MMמיידית - 199$58.21הצגת הפרטים
1/8 BRICK HEATSINK 23X58X6.1MMATS-1183-C1-R01/8 BRICK HEATSINK 23X58X6.1MMמיידית - 34$46.13הצגת הפרטים
1/8 BRICK HEATSINK 23X59X11.4MMATS-1184-C1-R01/8 BRICK HEATSINK 23X59X11.4MMמיידית - 245$52.37הצגת הפרטים
1/8 BRICK HEATSINK 23X58X22.9MMATS-1186-C1-R01/8 BRICK HEATSINK 23X58X22.9MMמיידית - 263$57.89הצגת הפרטים
1/4 BRICK HEATSINK 58X37X6.1MMATS-1098-C1-R01/4 BRICK HEATSINK 58X37X6.1MMמיידית - 78$51.65הצגת הפרטים
1/4 BRICK HEATSINK 58X37X11.4MMATS-1099-C1-R01/4 BRICK HEATSINK 58X37X11.4MMמיידית - 555$52.54הצגת הפרטים
1/4 BRICK HEATSINK 58X37X22.9MMATS-1101-C1-R01/4 BRICK HEATSINK 58X37X22.9MMמיידית - 167$71.83הצגת הפרטים
1/4 BRICK HEATSINK 37X58X6.1MMATS-1138-C1-R01/4 BRICK HEATSINK 37X58X6.1MMמיידית - 166$56.85הצגת הפרטים
1/4 BRICK HEATSINK 37X58X11.4MMATS-1139-C1-R01/4 BRICK HEATSINK 37X58X11.4MMמיידית - 0$64.62הצגת הפרטים
1/4 BRICK HEATSINK 37X58X22.9MMATS-1141-C1-R01/4 BRICK HEATSINK 37X58X22.9MMמיידית - 538$71.40הצגת הפרטים
1/2 BRICK HEATSINK 61X58X6.1MMATS-1103-C1-R01/2 BRICK HEATSINK 61X58X6.1MMמיידית - 0$59.82הצגת הפרטים
1/2 BRICK HEATSINK 61X58X11.4MMATS-1104-C1-R01/2 BRICK HEATSINK 61X58X11.4MMמיידית - 2548$57.81הצגת הפרטים
1/2 BRICK HEATSINK 61X58X22.9MMATS-1106-C1-R01/2 BRICK HEATSINK 61X58X22.9MMמיידית - 34$79.71הצגת הפרטים
1/2 BRICK HEATSINK 58X61X6.1MMATS-1143-C1-R01/2 BRICK HEATSINK 58X61X6.1MMמיידית - 0$57.89הצגת הפרטים
1/2 BRICK HEATSINK 58X61X11.4MMATS-1144-C1-R01/2 BRICK HEATSINK 58X61X11.4MMמיידית - 313$68.03הצגת הפרטים
1/2 BRICK HEATSINK 58X61X22.9MMATS-1146-C1-R01/2 BRICK HEATSINK 58X61X22.9MMמיידית - 614$80.61הצגת הפרטים
FULL BRICK HEATSINK 117X61X6.1MMATS-1108-C1-R0FULL BRICK HEATSINK 117X61X6.1MMמיידית - 99$68.32הצגת הפרטים
FULL BRICK HEATSINK 117X61X11.4MATS-1109-C1-R0FULL BRICK HEATSINK 117X61X11.4Mמיידית - 276$77.89הצגת הפרטים

Related Videos

ATS Explains - Thermal Interface Material
ATS Explains - Thermal Interface Material

תאריך פרסום: 2018-01-26

Related Product Highlight

Brick Heat Sinks ATS has produced a broad array of high performance heat sinks, based off of the patented maxiFLOW™ design.

Related Articles and Blogs

Feasibility Study of an LED-Based Lighting System Using Analytical Modeling A study of the heat loads for an outdoor LED-based lighting system using analytical modeling to determine the feasibility of the design with solar heat load.
Device Thermal Coupling on a PCB A look at how components on a printed circuit board thermally couple and the design considerations that help minimize heat dissipation problems.
Air Flow Measurement in Electronic Systems An analysis of circuit board air flow measurement techniques and the considerations required to obtain an accurate reading in this complex environment.

Related Product Training Modules

Introduction to Heat Sinks This module will review the use of heat sinks, including how a heat sink works, the factors that impact heat sink thermal performance, common heat sink materials, and thermal interface materials.
maxiFLOW Power Brick Heat Sink Technology ATS’s power brick heat sinks are engineered to create minimum pressure drop and maximize fin surface area
maxiFLOW™ Heat Sinks maxiFLOW heat sinks feature a low profile spread fin array that maximizes surface area. Available in a wide variety of sizes and shapes.