TMC5062-EVAL-KIT: Dual Bipolar, 1.1A, 4.5 ~ 20V in
TMC5062-EVAL-KIT is a set of one MCU Board "Landungsbrücke", a bridge Board and TMC5062-EVAL driver Board. It allows for a quick and simple start within only minutes to make your motor turning, while still providing full access to all registers and full functionality and diagnostics.
For Diagnosis all Signals between MCU and TMC5062 are accessible with probes on the "Eselsbrücke" Bridgeboard.
To simplify the transfer to your own processor platform the MCU board can be disconnected.
Additionally required is a Power Supply (max. 24V).
|Manufacturer||Trinamic Motion Control GmbH|
|Eval Board Part Number||1460-1096-ND|
|Eval Board Supplier||Trinamic Motion Control GmbH|
Normally In Stock
5 ~ 20 V
|Number of Motors and Type||
2, Stepper Motors, BiPolar
|Power / Current Out||
1.1 A (x2)
GUI / Design Software
Over Current Protection
Short Circuit Protection
Under Voltage Protection, Brown-Out
|Component Count + Extras||
|Application / Target Market||
Security IP Camera
|Main I.C. Base Part||