EPC9111(#1): 35W, Class 3, Rezence (A4WP) Compatible

Summary

The EPC9111 Wireless power demonstration system is a high efficiency, A4WP compatible, Zero Voltage Switching (ZVS), Voltage Mode Class D Wireless Power transfer demonstration kit capable of delivering up to 35 W into a DC load while operating at 6.78 MHz (Lowest ISM band). It includes an amplifier board (EPC9506) with a pre-regulator that limits the output current and voltage and ensures proper operation of the amplifier regardless of coupling and load variations between the source and device. The purpose of this demonstration system is to simplify the evaluation process of the wireless power technology using eGaN® FETs. GaN

The EPC9111 wireless power system comprises three boards (shown in figure 1) namely:

1) A Source Board (Transmitter or Power Amplifier) EPC9506
2) A Class 3 A4WP compliant Source Coil (Transmit Coil)
3) A Category 3 A4WP compliant Device Coil with rectifier and DC smoothing capacitor.

Specifications

Manufacturer	EPC
Category	Wireless Communication
Sub-Category	Wireless Power / Inductive Charging
Eval Board Part Number	917-1053-ND
Eval Board Supplier	EPC
Eval Board	Normally In Stock
Voltage Out	38 V Max
Current Out	35 W Max
Protocol	Rezence
Voltage In	8 ~ 32 V
Current In	- Not Given
Standard(s)	A4WP Compatible
Efficiency @ Conditions	- Not Given
Features	Current Foldback Protection
Frequency	6.78 MHz
No-load Input Power @ Conditions	- Not given
Component Count + Extras	126 + 15
Design Author	EPC
Main I.C. Base Part	EPC2014
Date Created By Author	2014-01
Date Added To Library	2016-04