הגדרות
אספקה מהירה
אספקה מהירה
Incoterms
סוגי תשלום
מוצרי Marketplace
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Product List
Pull-up resistors can also be added to the clock and data lines to optimize the I²C EEPROM design. Depending on the speed of the bus, a 2 kΩ or 10 kΩ resistor is used. To further optimize the system with minimized power consumption or maximized speed, Application Note AN1028 goes through the calculations to select the optimal resistor size.
PTM פורסם ב:
ישראל