CCG1R5 and CCG3 DC/DC Converters
TDK Lambda’s 1.5 W and 3 W DC/DC converters are available in surface-mount and through-hole packaging
TDK Lambda's CCG1R5 (1.5 W) and CCG3 (3 W) parts operate convection-cooled at full load from -40°C to +85°C. These models are made up of 36 voltage and current combinations with 3.3 V, 5 V, 12 V, 15 V, and dual ±12 V and ±15 V outputs. The dual output models can also be connected to supply 24 V and 30 V. They can all operate from either 4.5 V to 18 V, 9 V to 36 V, or 18 V to 76 VDC inputs to support operation from 5 V, 12 V, 24 V, and 48 V power sources. This 4:1 input range can assist with inventory reduction programs with one part covering two nominal voltages. All voltage combinations are available with terminations for either surface-mount or through-hole placement.
Both the 1.5 W and 3 W share a common compact package size of 15.7 mm x 10.4 mm x 11.5 mm (length x width x height). The plastic case is not encapsulated, avoiding quality risks associated with silicone potting compounds during reflow soldering. Overcurrent protection and remote on/off is standard, with a -5/+10% output voltage adjustment range on single outputs only. The input to output isolation is 1,500 VDC and the certifications are to the IEC/UL/CSA/EN 62368-1 safety standards with the CE and UKCA marks for the low-voltage and RoHS directives.
- Wide 4:1 input range
- Space-saving package sizes
- Certified to IEC 62368-1
- Reduced derating at high ambient temperatures
- No silicone potting
- Data and telecommunications
- Test and measurement
- Process control
- Battery powered equipment