Due to the fluxgate principle, there is a significant ripple on the output with a fundamental frequency of 450kHz. The simplest way to attenuate the ripple is to add an RC low pass filter to the output. Drawbacks of the RC low-pass are reduced bandwidth if significant ripple attenuation is required, and degradation of dv/dt recovery time. Higher order filters or digital filters inserted after blanking can solve this.
 
                 
                 
                 
 
 
 
 הגדרות
        הגדרות
     אספקה מהירה
                                    אספקה מהירה
                                 אספקה מהירה
                                    אספקה מהירה
                                 Incoterms
                                    Incoterms
                                 סוגי תשלום
                                    סוגי תשלום
                                





 מוצרי Marketplace
                                    מוצרי Marketplace
                                 
             
                     
                                 
                                 
                                 
                         
                                 
                                 
                                 
                                 
                                 
                                 
                                 ישראל
ישראל